INTERLIS 2.4;

/* ########################################################################
   CHBASE - BASE MODULES OF THE SWISS FEDERATION FOR MINIMAL GEODATA MODELS
   ======
   BASISMODULE DES BUNDES           MODULES DE BASE DE LA CONFEDERATION
   FÜR MINIMALE GEODATENMODELLE     POUR LES MODELES DE GEODONNEES MINIMAUX

   PROVIDER: GKG/KOGIS - GCS/COSIG             CONTACT: models@geo.admin.ch
   PUBLISHED: 2025-07-30
   ########################################################################
*/

/* ########################################################################
   ########################################################################
   PART I -- GEOMETRY
   - Package Geometry
   - Package GeometryCHLV03
   - Package GeometryCHLV95
*/

!! Version    | Who   | Modification
!!------------------------------------------------------------------------------
!! 2021-10-19 | KOGIS | DirectedLine and DirectedLineWithoutArcs in models GeometryCHLV03_V2 and GeometryCHLV95_V2 adapted
!! 2025-07-29 | KOGIS | Change to SwissOrthometicAlt in models GeometryCHLV03_V2 and GeometryCHLV95_V2

!! ########################################################################
!!@technicalContact=mailto:models@geo.admin.ch
!!@furtherInformation=https://www.geo.admin.ch/en/geodata-models
TYPE MODEL Geometry_V2 (en)
  AT "https://models.geo.admin.ch/CH/" VERSION "2021-01-06" =

  IMPORTS Units;

  DOMAIN
    Coord2 (GENERIC) = COORD NUMERIC, NUMERIC;
    Coord3 (GENERIC) = COORD NUMERIC, NUMERIC, NUMERIC;
    MultiPoint (GENERIC) = MULTICOORD NUMERIC, NUMERIC;
    MultiPoint3D (GENERIC) = MULTICOORD NUMERIC, NUMERIC, NUMERIC;

    /* line strings and surfaces with STRAIGHTS and ARCS */
    Surface = SURFACE WITH (STRAIGHTS, ARCS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    Area = AREA WITH (STRAIGHTS, ARCS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    Line = POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord2;
    DirectedLine EXTENDS Line = DIRECTED POLYLINE;
    LineWithAltitude = POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord3;
    DirectedLineWithAltitude = DIRECTED POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord3;

    /* line strings and surfaces without ARCS */
    SurfaceWithoutArcs = SURFACE WITH (STRAIGHTS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    AreaWithoutArcs = AREA WITH (STRAIGHTS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    LineWithoutArcs = POLYLINE WITH (STRAIGHTS) VERTEX Coord2;
    DirectedLineWithoutArcs EXTENDS LineWithoutArcs = DIRECTED POLYLINE;
    LineWithAltitudeWithoutArcs = POLYLINE WITH (STRAIGHTS) VERTEX Coord3;
    DirectedLineWithAltitudeWithoutArcs = DIRECTED POLYLINE WITH (STRAIGHTS) VERTEX Coord3;

    Orientation = 0.00000 .. 359.99999 CIRCULAR [Units.Angle_Degree] <Coord2>;

    Accuracy = (cm, cm50, m, m10, m50, vague);
    Method = (measured, sketched, calculated);

END Geometry_V2.

!! ########################################################################
!!@technicalContact=mailto:models@geo.admin.ch
!!@furtherInformation=https://www.geo.admin.ch/en/geodata-models
TYPE MODEL GeometryCHLV03_V2 (en)
  AT "https://models.geo.admin.ch/CH/" VERSION "2025-07-29" =

  IMPORTS Units;
  IMPORTS CoordSys;
  IMPORTS Geometry_V2;

  REFSYSTEM BASKET BCoordSys ~ CoordSys.CoordsysTopic
    OBJECTS OF GeoCartesian2D: CHLV03
    OBJECTS OF GeoHeight: SwissOrthometricAlt;

  DOMAIN
    !!@CRS=EPSG:21781
    Coord2 EXTENDS Geometry_V2.Coord2 = COORD
      460000.000 .. 870000.000 [INTERLIS.m] {CHLV03[1]},
       45000.000 .. 310000.000 [INTERLIS.m] {CHLV03[2]},
      ROTATION 2 -> 1;

    !!@CRS=EPSG:21781
    Coord3 EXTENDS Geometry_V2.Coord3 = COORD
      460000.000 .. 870000.000 [INTERLIS.m] {CHLV03[1]},
       45000.000 .. 310000.000 [INTERLIS.m] {CHLV03[2]},
        -200.000 ..   5000.000 [INTERLIS.m] {SwissOrthometricAlt[1]},
      ROTATION 2 -> 1;

    !!@CRS=EPSG:21781
    MultiPoint EXTENDS Geometry_V2.MultiPoint = MULTICOORD
      460000.000 .. 870000.000 [INTERLIS.m] {CHLV03[1]},
       45000.000 .. 310000.000 [INTERLIS.m] {CHLV03[2]},
      ROTATION 2 -> 1;

    !!@CRS=EPSG:21781
    MultiPoint3D EXTENDS Geometry_V2.MultiPoint3D = MULTICOORD
      460000.000 .. 870000.000 [INTERLIS.m] {CHLV03[1]},
       45000.000 .. 310000.000 [INTERLIS.m] {CHLV03[2]},
        -200.000 ..   5000.000 [INTERLIS.m] {SwissOrthometricAlt[1]},
      ROTATION 2 -> 1;

    /* line strings and surfaces with STRAIGHTS and ARCS */
    Surface EXTENDS Geometry_V2.Surface = SURFACE WITH (STRAIGHTS, ARCS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    Area EXTENDS Geometry_V2.Area = AREA WITH (STRAIGHTS, ARCS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    Line EXTENDS Geometry_V2.Line = POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord2;
    DirectedLine EXTENDS Geometry_V2.DirectedLine = DIRECTED POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord2;
    LineWithAltitude EXTENDS Geometry_V2.LineWithAltitude = POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord3;
    DirectedLineWithAltitude EXTENDS Geometry_V2.DirectedLineWithAltitude = DIRECTED POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord3;

    MultiLine = MULTIPOLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord2;
    MultiDirectedLine = DIRECTED MULTIPOLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord2;
    MultiSurface = MULTISURFACE WITH (STRAIGHTS, ARCS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;

    /* line strings and surfaces without ARCS */
    SurfaceWithoutArcs EXTENDS Geometry_V2.SurfaceWithoutArcs = SURFACE WITH (STRAIGHTS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    AreaWithoutArcs EXTENDS Geometry_V2.AreaWithoutArcs = AREA WITH (STRAIGHTS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    LineWithoutArcs EXTENDS Geometry_V2.LineWithoutArcs = POLYLINE WITH (STRAIGHTS) VERTEX Coord2;
    DirectedLineWithoutArcs EXTENDS LineWithoutArcs = DIRECTED POLYLINE WITH (STRAIGHTS) VERTEX Coord2;
    LineWithAltitudeWithoutArcs EXTENDS Geometry_V2.LineWithAltitudeWithoutArcs = POLYLINE WITH (STRAIGHTS) VERTEX Coord3;
    DirectedLineWithAltitudeWithoutArcs EXTENDS Geometry_V2.DirectedLineWithAltitudeWithoutArcs = DIRECTED POLYLINE WITH (STRAIGHTS) VERTEX Coord3;

    MultiLineWithoutArcs = MULTIPOLYLINE WITH (STRAIGHTS) VERTEX Coord2;
    MultiDirectedLineWithoutArcs = DIRECTED MULTIPOLYLINE WITH (STRAIGHTS) VERTEX Coord2;
    MultiSurfaceWithoutArcs = MULTISURFACE WITH (STRAIGHTS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;

    Orientation = 0.00000 .. 359.99999 CIRCULAR [Units.Angle_Degree] <Coord2>;

    Accuracy = (cm, cm50, m, m10, m50, vague);
    Method = (measured, sketched, calculated);

END GeometryCHLV03_V2.

!! ########################################################################
!!@technicalContact=mailto:models@geo.admin.ch
!!@furtherInformation=https://www.geo.admin.ch/en/geodata-models
TYPE MODEL GeometryCHLV95_V2 (en)
  AT "https://models.geo.admin.ch/CH/" VERSION "2025-07-29" =

  IMPORTS Units;
  IMPORTS CoordSys;
  IMPORTS Geometry_V2;

  REFSYSTEM BASKET BCoordSys ~ CoordSys.CoordsysTopic
    OBJECTS OF GeoCartesian2D: CHLV95
    OBJECTS OF GeoHeight: SwissOrthometricAlt;

  DOMAIN
    !!@CRS=EPSG:2056
    Coord2 EXTENDS Geometry_V2.Coord2 = COORD
      2460000.000 .. 2870000.000 [INTERLIS.m] {CHLV95[1]},
      1045000.000 .. 1310000.000 [INTERLIS.m] {CHLV95[2]},
      ROTATION 2 -> 1;

    !!@CRS=EPSG:2056
    Coord3 EXTENDS Geometry_V2.Coord3 = COORD
      2460000.000 .. 2870000.000 [INTERLIS.m] {CHLV95[1]},
      1045000.000 .. 1310000.000 [INTERLIS.m] {CHLV95[2]},
         -200.000 ..    5000.000 [INTERLIS.m] {SwissOrthometricAlt[1]},
      ROTATION 2 -> 1;
      
    !!@CRS=EPSG:2056
    MultiPoint EXTENDS Geometry_V2.MultiPoint = MULTICOORD
      2460000.000 .. 2870000.000 [INTERLIS.m] {CHLV95[1]},
      1045000.000 .. 1310000.000 [INTERLIS.m] {CHLV95[2]},
      ROTATION 2 -> 1;

    !!@CRS=EPSG:2056
    MultiPoint3D EXTENDS Geometry_V2.MultiPoint3D = MULTICOORD
      2460000.000 .. 2870000.000 [INTERLIS.m] {CHLV95[1]},
      1045000.000 .. 1310000.000 [INTERLIS.m] {CHLV95[2]},
         -200.000 ..    5000.000 [INTERLIS.m] {SwissOrthometricAlt[1]},
      ROTATION 2 -> 1;

    /* line strings and surfaces with STRAIGHTS and ARCS */
    Surface EXTENDS Geometry_V2.Surface = SURFACE WITH (STRAIGHTS, ARCS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    Area EXTENDS Geometry_V2.Area = AREA WITH (STRAIGHTS, ARCS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    Line EXTENDS Geometry_V2.Line = POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord2;
    DirectedLine EXTENDS Geometry_V2.DirectedLine = DIRECTED POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord2;
    LineWithAltitude EXTENDS Geometry_V2.LineWithAltitude = POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord3;
    DirectedLineWithAltitude EXTENDS Geometry_V2.DirectedLineWithAltitude = DIRECTED POLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord3;

    MultiLine = MULTIPOLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord2;
    MultiDirectedLine = DIRECTED MULTIPOLYLINE WITH (STRAIGHTS, ARCS) VERTEX Coord2;
    MultiSurface = MULTISURFACE WITH (STRAIGHTS, ARCS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;

    /* line strings and surfaces without ARCS */
    SurfaceWithoutArcs EXTENDS Geometry_V2.SurfaceWithoutArcs = SURFACE WITH (STRAIGHTS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    AreaWithoutArcs EXTENDS Geometry_V2.AreaWithoutArcs = AREA WITH (STRAIGHTS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;
    LineWithoutArcs EXTENDS Geometry_V2.LineWithoutArcs = POLYLINE WITH (STRAIGHTS) VERTEX Coord2;
    DirectedLineWithoutArcs EXTENDS LineWithoutArcs = DIRECTED POLYLINE WITH (STRAIGHTS) VERTEX Coord2;
    LineWithAltitudeWithoutArcs EXTENDS Geometry_V2.LineWithAltitudeWithoutArcs = POLYLINE WITH (STRAIGHTS) VERTEX Coord3;
    DirectedLineWithAltitudeWithoutArcs EXTENDS Geometry_V2.DirectedLineWithAltitudeWithoutArcs = DIRECTED POLYLINE WITH (STRAIGHTS) VERTEX Coord3;

    MultiLineWithoutArcs = MULTIPOLYLINE WITH (STRAIGHTS) VERTEX Coord2;
    MultiDirectedLineWithoutArcs = DIRECTED MULTIPOLYLINE WITH (STRAIGHTS) VERTEX Coord2;
    MultiSurfaceWithoutArcs = MULTISURFACE WITH (STRAIGHTS) VERTEX Coord2 WITHOUT OVERLAPS > 0.001;

    Orientation = 0.00000 .. 359.99999 CIRCULAR [Units.Angle_Degree] <Coord2>;

    Accuracy = (cm, cm50, m, m10, m50, vague);
    Method = (measured, sketched, calculated);

END GeometryCHLV95_V2.

!! ########################################################################